When something in a home's wiring stops working, the first question is usually the same: is this a quick fix or something bigger? Pima Electrical Contractors handles both for homeowners and property managers throughout Picture Rocks. From a dead outlet in a back bedroom to a panel that cannot keep up with the load, work is performed by licensed electricians who know the electrical demands this region puts on a home. Same-day service is often available. Call (520) 336-9828 for a quote.
Picture Rocks is a town of single-family homes, outbuildings, and properties that have often been added to over the years. That kind of housing stock generates a specific kind of electrical work: circuits that were added without documentation, wiring that predates current code, and panels that were sized for a simpler load than what runs through them today. We cover all of it, from straightforward repairs to full rewiring projects, and we explain what we find before any work begins.
A pre-purchase inspection is one of the more useful calls we take. When a property in Picture Rocks is changing hands, a buyer deserves to know what the wiring actually looks like before the sale closes. Pima Electrical Contractors walks through the panel, the circuits, the outlets, the grounding and bonding, and the protection devices, and produces a clear written record of what is there and what needs attention. That record has real value: it shapes negotiation, informs repair timelines, and documents the condition of the property at the time of transfer.
Sellers use the same inspection to get ahead of issues before a buyer's electrician finds them. Landlords and property managers use it to confirm a rental unit meets current standards before a new tenant moves in. Whatever the reason for the call, the result is the same: a documented picture of the electrical system, written plainly, with no guesswork about what it means.
Smart switch and dimmer installation is a straightforward upgrade that changes how a room functions. We handle the wiring behind the switch, confirm the circuit is compatible, and install the device correctly so it performs as expected. Older homes sometimes need a neutral wire added at the switch box before a smart switch will work, and we assess that before the job begins.
A detached garage or workshop that runs serious equipment needs more than a single circuit run from the house. A subpanel sized to the actual load gives a separate structure its own distribution point, keeps the main panel from being overloaded, and makes future circuit additions straightforward. We size the subpanel correctly from the start, which means a load calculation before any materials are ordered.
Outlet and switch replacement is one of the most common calls we handle. A failed outlet, a switch that no longer responds, or a receptacle that runs warm all point to something specific in the circuit. We diagnose the cause, not just the symptom, and replace what needs replacing. GFCI outlets in kitchens, bathrooms, garages, and outdoor locations are part of this work wherever protection is required or missing.
Homes built during certain periods were wired with aluminum branch circuits rather than copper. Aluminum behaves differently under heat and load cycling, and connection failures at outlets, switches, and fixtures are a documented risk. Remediation typically involves installing approved connectors at each connection point, or replacing the branch circuits entirely where the scope calls for it. We assess what is there and explain the options before any work begins.
A welder, an air compressor, or a large shop tool draws more power than a standard household circuit can supply. We run dedicated circuits sized to the equipment's actual amperage requirement, confirm the panel has the capacity to carry the added load, and install the correct outlet or connection for the tool. If the panel needs attention first, we scope that as part of the same project.
An electric range, wall oven, or dryer each needs its own dedicated 240-volt circuit. A shared circuit or an undersized wire run is a safety issue, not just a performance one. We run the circuit from the panel, install the correct outlet, and confirm the breaker is sized to match. For a new appliance going into a space that was not previously wired for it, we handle the full circuit installation.
The hardest part of an electrical problem is knowing when to call, and in a town like Picture Rocks, where a lot of homes have been modified and added to over the years, a fault is not always where it looks like it should be. We trace the circuit, test the devices, and find the actual cause before touching anything. That process protects the rest of the system and avoids replacing parts that are not the problem.
Flickering lights, breakers that trip under normal load, outlets that stopped working, and wiring that runs warm are all situations that need a proper diagnostic rather than a guess. We show up ready to wire, and that means showing up ready to find the issue first.
The continuous load that air conditioning puts on a panel through a long regional summer is real, and older panels were not sized for it. A 100-amp service that was adequate when a home was built may not be adequate now, particularly if circuits have been added, appliances have been upgraded, or the home is being considered for a solar or battery system. We perform a full load calculation before recommending any upgrade, so the new panel is sized to what the home actually needs rather than a round number.
For homes where solar or battery storage is part of the plan, the panel is usually the first thing that needs to be addressed. We handle the panel capacity work and the interconnect circuits. The service page carries the full breakdown of what each scope involves.
Installation calls in Picture Rocks cover a wide range: a new ceiling fan in a room that never had one, a dedicated circuit for an EV charger in the garage, a whole-home surge protector installed at the panel ahead of monsoon season, or a backup generator hookup with a properly wired transfer switch. Each of these starts with a look at the panel to confirm capacity, then moves to the circuit and the device. We'll handle the wiring so you don't have to.
When you call, the first thing that happens is a conversation about the job. We go through what you are seeing, what the work involves, and what it will cost before anything is booked. The price is confirmed once the scope is clear, and you are told what it covers before work begins.
What changes a quote is usually scope: a job that looks like a single outlet replacement sometimes turns out to involve a wiring fault upstream, or a panel that needs attention before the new circuit can be added safely. We explain what we find and what it means for the price before proceeding. There are no commitments made until you have the information you need to decide.
To get a quote, call (520) 336-9828. We are available every day from 5:00 AM to 8:00 PM.
Same-day appointments are often available for repair calls and straightforward installs. For larger projects, we work around what the property and the people in it actually need. A tenant who cannot lose power to a refrigerator during a full workday, a home office that needs to stay online, a business that cannot close for a panel job: these are scheduling realities we account for, not complications.
When a problem will not keep, call us during our hours and describe what you are seeing. We will assess the urgency and work to get someone out as quickly as the schedule allows. We are available every day from 5:00 AM to 8:00 PM, including weekends, so a problem that surfaces on a Saturday morning does not have to wait until Monday.
For rental properties, we coordinate access with whoever is on-site. You do not need to be present for every visit, but we confirm the details when we book so there are no gaps on the day.
Some electrical work requires a permit before it can be inspected and signed off. Panel upgrades, new service entrances, and certain circuit installations typically fall into that category. The rules vary depending on the jurisdiction and whether the work is on private property or involves the utility service entrance, and we confirm what applies to your specific job before work begins.
We handle the permit coordination where it is required. You are not left to figure out the process on your own. Permit timing can affect how a job is scheduled, and we factor that in when we book the work so there are no delays once the electrician arrives.
If you would rather read than call, the page about wiring and panels has the detail.
Scheduling electrical work on a rental property involves more moving parts than a standard homeowner call. We service this area because we know the neighborhoods and the wiring in them, and that includes working with landlords and property managers who are not always on-site when the work happens.
When you book as a property manager, we confirm who holds the invoice, who provides access, and what documentation you need after the job is complete. For landlords who need a written record for code compliance or insurance purposes, we document what was found and what was done. The tenant is kept informed of what the visit involves, and access is arranged before the electrician arrives. A straightforward choice for homeowners and property managers who need the electrical side handled without back-and-forth.
We cover Picture Rocks and the communities around it throughout Pima County. If the property is in Nelson, Avra Valley, the Tucson Mountains area, Marana, or Tucson Estates, we cover that too. The same service, the same process, and the same pricing approach apply regardless of which side of the town line the property sits on.
For any address in the area, call (520) 336-9828 and we will confirm coverage when we take the details.
Yes, almost always. High-draw equipment like welders and compressors can pull enough current to cause problems on a shared circuit, including nuisance tripping and voltage drop that affects other devices. A dedicated circuit sized to the equipment's actual draw is the correct solution, and we can add one as a standalone job or alongside other work.
Older homes in this area were built under different standards, and additions or modifications made over the years are not always documented. An inspection on an older property is more likely to turn up aluminum branch-circuit wiring, ungrounded outlets, undersized circuits, or a panel that has been modified informally. We document what is there and explain what it means, so you have a clear picture of the actual condition of the electrical system before deciding on next steps.
We document what was checked and what was ruled out, then walk you through the next steps before leaving. Sometimes a fault is intermittent and only shows up under specific load conditions. If a second visit is needed, we schedule it with a clear plan for what to test next rather than starting over from scratch.
It can. Fixtures on vaulted or two-story ceilings require working at height safely, and we come prepared for that. If a job involves an unusually high ceiling, it is worth mentioning when you call so we can confirm what is needed and make sure the visit goes smoothly.
We go through the panel, the wiring, the outlets and switches, the grounding and bonding, and the protection devices such as GFCI and AFCI breakers or outlets. We note anything that does not meet current code or that shows signs of wear or damage. You get a plain explanation of what we found and what, if anything, needs attention.
Yes. A general safety inspection covers the panel, the wiring, the outlets, and the protection devices without being tied to a single complaint. Homeowners use this when buying a property, before a renovation, or simply to know where things stand. Landlords use it to confirm rental units are in good shape before a new tenancy begins.
Yes. Detached garages, workshops, and outbuildings are a regular part of the work we do in this area. Depending on the load and how the structure is used, the right approach might be a single circuit run from the house or a subpanel sized to the equipment that will run there. We assess the situation, run the load calculation, and recommend the option that fits the actual use of the space.
We work through the home in sections, completing and restoring power to one area before moving to the next where possible. The sequence depends on the layout and the scope of the project. We go through the plan with you before starting so you know which rooms will be affected and when, and we keep the disruption as contained as the job allows.
Electrical problems have a way of staying on the to-do list longer than they should. A breaker that trips once a week, an outlet that stopped working in a room you do not use much, a panel that is starting to show its age: none of them fix themselves, and most of them get more involved the longer they sit.
Pima Electrical Contractors covers Picture Rocks and the surrounding area, and same-day service is often available when you call during our hours. Fast turnaround. Fair pricing. Safe results. Call (520) 336-9828 today, describe what you are seeing, and we will give you a rate and get you on the schedule.
Other towns in range: Tucson Mountains, Marana, Tucson Estates, Flowing Wells. See the whole of our full service area.
We handle the full range of residential and commercial electrical work in Picture Rocks and across Pima County, from everyday repairs to panel upgrades, solar interconnection wiring, and EV charger circuits. The table below breaks down what each service covers, who it fits best, and what is practical to know before you call. We are open daily from 5:00 AM to 8:00 PM, and same-day service is often available for repairs and straightforward installs. Call (520) 336-9828 for a quote on any of the work listed here.
| Electrical Service | What's Included | When You Need It | What to Keep in Mind |
|---|---|---|---|
| Dedicated Appliance Circuits | dryer and washer circuitsrefrigerator and dishwasher circuitshot tub and pool equipment circuitsworkshop and garage circuits | homeowners adding a major appliance or building out a garage or workshop | Adding dedicated circuits during a panel upgrade keeps the work clean and avoids a second visit. We often scope both together. |
| Whole-Home Surge Protection | whole-home suppressor installed at the panelprotection for appliances and electronicsmonsoon and utility fluctuation defensecombined with panel upgrades when applicable | Pima County homeowners with electronics, appliances, or a home battery system to protect | Arizona's monsoon season brings lightning and utility fluctuations that can damage wiring and equipment in a single event. A suppressor at the panel is one of the more practical installations we do in this area. |
| Lighting Installation | recessed LED and fixture replacementunder-cabinet lightingsecurity and motion sensor lightsoutdoor landscape and patio lighting | homeowners remodeling, adding outdoor lighting, or upgrading to LED | Outdoor lighting in Picture Rocks takes real sun and heat exposure. Weatherproof fixtures and correct circuit protection make a difference in how long the installation holds up. |
| Outdoor & Misting-System Circuits | dedicated outdoor circuitsweatherproof outlet installationcovered patio and pergola wiringmisting system power supply | homeowners adding outdoor living space or a misting system in the Picture Rocks heat | Outdoor circuits in this climate need weatherproof boxes, correct conduit, and GFCI protection. We spec the installation to handle the sun and heat exposure here. |
| Ceiling Fan Installation | new fan installation with wiringfan and light kit replacementswitch and remote wiringbrace box installation for older boxes | homeowners adding comfort and airflow in bedrooms, living areas, or covered patios | Older ceiling boxes are often not rated for a fan's weight and movement. We check the box and replace it if needed before the fan goes up. |
| Electrical Repairs & Troubleshooting | dead outlets and switchesflickering or dimming lightstripping breakerswiring faults and diagnostics | homeowners and renters dealing with an active electrical problem | A full diagnostic runs before any repair so the fix addresses the actual cause, not just the symptom. |
| RV Hookups | 30-amp and 50-amp RV outlet installationdedicated circuit from the main panelweatherproof outlet and conduitpermit coordination where required | homeowners who store an RV or trailer on their property and want a proper hookup | A dedicated circuit sized to the RV's draw is safer and more reliable than an extension cord setup. We confirm panel capacity before adding the circuit. |
| Breaker & Fuse Repair | breaker replacementbreaker that trips immediately on resetfuse panel evaluationpanel labeling and documentation | homes where a single breaker or fuse is the problem rather than the whole panel | A breaker that trips immediately on reset or runs warm is a sign of a fault on the circuit, not just a worn breaker. We diagnose the circuit before replacing hardware. |
| Wiring & Circuit Installation | new circuit runswhole-home rewiringknob-and-tube and aluminum wiring remediationcode compliance and permit coordination | older homes with outdated wiring, additions, and new construction | Homes in the Picture Rocks area built before the 1980s may carry wiring installed under standards that have since been updated. We assess what is there and explain the options before any work begins. |
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgradesload calculation before any upgradeservice entrance and meter base workbreaker panel replacement | homes with frequent tripping, limited breaker space, or added load from AC, EV chargers, or solar | Arizona summers put continuous load on air-conditioning systems. Homes built with 100-amp service were not designed for that combined demand. A load calculation confirms whether an upgrade is the right solution before any work is scheduled. |
| EV Charger Installation | Level 2 charger circuit installation240-volt dedicated circuitpanel capacity check before installpermit coordination | EV owners who want faster daily charging at home | We check panel capacity before every EV charger installation. If an upgrade is needed, we scope it as part of the same project so you are not scheduling two separate visits. |
| Outlet & Switch Installation | standard and GFCI outletsAFCI and tamper-resistant receptaclesUSB and weatherproof outdoor outletsdimmer and three-way switches | homeowners updating a kitchen, bathroom, garage, or outdoor space | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. We flag unprotected locations and can bring them up to current code while already on the job. |
| Solar & Battery Installation | solar interconnection wiringbattery storage circuit workinverter and panel capacity workpermit coordination for solar projects | homeowners adding rooftop solar or a home battery system | We handle the electrical side only: the wiring, dedicated circuits, and panel capacity work that connect the system to your home's power supply. We do not sell or mount solar equipment. |
| Electrical Safety Inspections | panel and wiring condition reviewgrounding and bonding checkoutlet and protection device assessmentwritten report of findings | homebuyers, sellers, landlords, and property managers | Inspections give you a clear picture of what a property needs before a sale closes or a tenant moves in. We issue a written report of what we find. |
Call (520) 336-9828 to talk through any of the services listed here and get a quote before anything is scheduled.
(520) 336-9828