Some electrical work gets planned well in advance. A kitchen remodel, a garage conversion, an EV charger circuit added before the car arrives. That kind of project has a timeline, and we schedule around it. Then there is the other kind: a breaker that stopped resetting, an outlet that went dead overnight, a panel that is running hot and nobody knows why. Pima Electrical Contractors handles both, and the process is the same either way. You call, you get a price, and we get the work on the calendar.
Tanque Verde is a town of single-family homes, many of them on larger lots with outbuildings, detached garages, and the kind of electrical setup that gets added to over the years without always being documented. That mix produces a specific range of calls: older circuits that were never sized for what they are running now, subpanels that need attention, and panel capacity questions that come up the moment a homeowner wants to add solar or a Level 2 charger. We handle all of it, for homeowners, property managers, and small businesses throughout the area.
Same-day appointments are often available for repair calls and straightforward installs. When you call, we go through what the job involves, confirm the rate, and get you on the schedule. If the problem is urgent, describe what you are seeing and we will work to get someone out as quickly as the day allows. We are available every day from 5:00 AM to 8:00 PM, so early calls and evening calls both reach us during business hours.
For tenants and businesses that cannot simply shut down and wait, we work around the schedule you have. That means confirming the appointment window when we book it, letting you know who is coming, and getting the work done without drawing out the visit. If a circuit needs to be off for part of the job, we tell you which one and for how long before we start.
Scheduling an electrician shouldn't be complicated. Call (520) 336-9828, describe the situation, and we will take it from there.
Not every call looks the same, and the situation that leads to a call matters as much as the label on the job. Here is how the work tends to divide.
The hardest part of an electrical problem is knowing when to call, and for most people the answer is when something stops working the way it should. A tripping breaker, a dead outlet, lights that flicker when the AC kicks on. These are not always simple fixes, and they are not always complicated ones either. The diagnostic is where we start. We trace the circuit, check the wiring, test the protection devices, and find the actual cause rather than replacing parts until something changes.
GFCI and AFCI protection come into the picture often on repair calls. Older homes in this area were wired before current protection requirements, and when a circuit misbehaves it is sometimes because a protection device has done its job and needs to be reset or replaced. We address that as part of the repair and flag anything else that warrants attention while we are on the job.
Continuous air-conditioning load through a long regional summer puts real demand on a home's electrical service. Panels that were sized for a different era of household load struggle when central AC, a modern kitchen, and a home office are all running at once. A 200-amp service upgrade gives the panel the capacity to handle that load without nuisance tripping or running at unsafe temperatures.
Every panel upgrade starts with a load calculation. That tells us what the new service needs to carry, including any circuits being added as part of the same project. If the service entrance or meter base is part of the problem, we include that in the scope. Work is performed by licensed electricians from start to finish. We show up ready to wire.
New circuits, new fixtures, new devices. This category covers a wide range: adding an outlet in a room that does not have one where you need it, wiring a ceiling fan where there was only a light fixture, running a dedicated circuit for an appliance that keeps tripping a shared breaker. It also covers larger installs like EV charger circuits, outdoor lighting, and whole-home surge protection.
The full breakdown of what we install and what each job involves is on the services page. If you are not sure whether a project needs a new circuit, a panel upgrade, or both, the call is the right place to start.
Older homes in Tanque Verde were wired for a different load than most households run today. Adding a hot tub, a workshop with heavy equipment, or a battery storage system connected to solar panels asks a lot of a panel that was never sized for it. Before any of that work begins, we assess what the existing service can actually carry.
We service this area because we know the neighborhoods and the wiring in them. A load calculation tells us the real picture: what is already on the panel, what headroom is left, and whether the service entrance can support what is being added. If the panel needs to come up before the new circuit can go in, we scope both as part of the same project so the work is done once and done correctly.
For homes where knob-and-tube wiring is still in place, or where aluminum branch-circuit wiring was installed in an earlier renovation, the assessment includes those systems too. Both require specific handling, and both affect what a property can safely support before any load is added.
A detached garage or workshop on a larger lot often ends up running more load than the original circuit was designed to handle. A subpanel fed from the main panel is the right solution when the structure needs multiple circuits rather than a single outlet run. We size the subpanel to the actual load, run the feeder from the main panel, and wire the individual circuits inside the structure. The result is a setup that can grow with the space.
Electric ranges, wall ovens, and dryers each need a dedicated 240-volt circuit sized to the appliance. When a new appliance is going in where there was a gas unit, or where the existing circuit is undersized, we run the new circuit from the panel and confirm the breaker is the right size for the load. This is one of the more common installs we handle alongside appliance deliveries and kitchen renovations.
A whole-home surge protector installs at the main panel and intercepts voltage spikes before they reach the circuits in the home. The monsoon season across this region brings lightning and utility fluctuations that can damage appliances, electronics, and wiring in a single event. Installing protection at the panel is one of the more practical things a homeowner can do before storm season, and it is a straightforward install that we often complete alongside other panel work.
Hot tubs, pool equipment, and heavy workshop tools all require dedicated circuits sized to their specific draw. The circuit size, the breaker rating, and the wire gauge all depend on what the equipment actually pulls. We confirm those specs before running any circuit, and we include the disconnect and any required protection devices as part of the installation. A properly wired circuit protects both the equipment and the panel it feeds from.
Keeping air moving through a home in this climate makes a real difference in comfort, and ceiling fan installation is one of the most common calls we get. If an existing box is rated for a fan, the install is straightforward. If the box needs to be replaced or a new circuit is required, we handle that as part of the same visit. We'll handle the wiring so you don't have to.
When you call, you get a rate before anything is scheduled. For common jobs, we can give you a solid number based on what you describe. For larger projects, the price is confirmed once the job is scoped, and you are told what it covers before work begins. No commitments are made until you have the information you need to decide.
What changes a quote is usually scope: a panel upgrade that also needs service entrance work, a ceiling fan install that requires a new circuit, an EV charger circuit where the panel needs to be upgraded first. We walk through that on the call and explain what each part of the job involves. The services page carries the full breakdown of what we handle and what each type of job typically includes.
Fast turnaround. Fair pricing. Safe results.
the page covering electrical jobs covers what the work involves before you call.
Most significant electrical work requires a permit, and what counts as significant depends on the jurisdiction. Panel upgrades, new circuits, service entrance work, and EV charger installations are the types of jobs that most commonly trigger a permit requirement. Work inside a finished wall or involving the main service entrance is more likely to need one than a straightforward device replacement.
We confirm what applies to your specific job before work begins and handle the permit process where it is required. Inspection timing affects the schedule, and we factor that in when we plan the work. You are not left to figure out the permit side on your own.
We cover Tanque Verde and the surrounding communities throughout Pima County. If you are in Catalina Foothills, Rincon Valley, Kleindale, or South Tucson, the same service applies. Tucson and the broader metro are part of our coverage area as well.
Wherever you are in the area, the process is the same. You call, we confirm the scope and the rate, and we get the work scheduled. Qualified electricians for every job, across every community we serve.
It can. If someone in the home depends on powered medical equipment, we plan the work to minimize interruption to those circuits and discuss the sequence of the job before starting. Mention it when you call so we can account for it in the scheduling and the approach.
In some situations, yes. A subpanel distributes load to a specific area, such as a garage, workshop, or addition, without requiring the main service to be upsized. Whether it is the right answer depends on the existing panel's capacity and what the new circuits need to carry. We run the numbers and explain the tradeoff on the call.
We let you know as soon as it becomes clear the job will need more time, and we schedule the follow-up before leaving. The work area is left in a safe condition at the end of each day, and we pick up where we left off at the agreed time. You are not left with an open project and no plan.
A failed outlet, switch, or fixture is often the whole problem, and replacing the fitting resolves it. We confirm that the wiring behind it is in good shape before closing up, so you are not left wondering whether there is something more going on. If the wiring does need attention, we explain that before doing anything further.
Extension cords are not rated for permanent use and create a real risk of overheating and fire, particularly when they are hidden under rugs or run through walls. The right fix is a proper outlet installed in the location where the power is actually needed. We can add outlets wherever they are missing so the extension cords can come out for good.
Homes on larger lots in this area often have wiring that was added to over the years, sometimes without permits or consistent documentation. That can mean undersized circuits, mismatched wire gauges, or protection devices that were never updated. When we take on a job in an older home, we run a full diagnostic of the affected circuit rather than assuming the wiring matches what the panel label says.
Start with a call to talk through the load you are planning to run. The answer depends on what the main panel currently has available and what the new space will need. A subpanel is often the right approach for a detached structure, but the sizing and the feeder run depend on the actual load calculation. We work through that on the call and give you a clear picture of what the project involves before anything is scheduled.
The work area is cleaned up before we leave. Packaging, wire offcuts, old fixtures, and any debris from the job are cleared. If the work involved opening a wall or ceiling, we leave the opening in the condition agreed on at the start of the job. We make the fix and leave it tidy.
We document what was checked and what was ruled out, then walk you through the next steps before leaving. Sometimes a fault is intermittent and only shows up under specific load conditions. If a second visit is needed, we schedule it with a clear plan for what to test next rather than starting over from scratch.
Pima Electrical Contractors covers electrical repairs, panel upgrades, new circuits, and installations throughout Tanque Verde and the surrounding area. Call (520) 336-9828 to describe the job and get a rate. We are available every day from 5:00 AM to 8:00 PM. The price is confirmed before anything is scheduled, and the work does not start until you have agreed to it.
Other towns in range: Catalina Foothills, Flowing Wells, Catalina. See the whole of our full service area.
We handle the full range of residential and commercial electrical work in Tanque Verde and across Pima County, from everyday repairs to panel upgrades, solar interconnection wiring, and EV charger circuits. The table below breaks down what each service covers, who it fits best, and what is practical to know before you call. We are open daily from 5:00 AM to 8:00 PM, and same-day service is often available for repairs and straightforward installs. Call (520) 336-9828 for a quote on any of the work listed here.
| Electrical Service | What's Included | When You Need It | What to Keep in Mind |
|---|---|---|---|
| Dedicated Appliance Circuits | dryer and washer circuitsrefrigerator and dishwasher circuitshot tub and pool equipment circuitsworkshop and garage circuits | homeowners adding a major appliance or building out a garage or workshop | Adding dedicated circuits during a panel upgrade keeps the work clean and avoids a second visit. We often scope both together. |
| Whole-Home Surge Protection | whole-home suppressor installed at the panelprotection for appliances and electronicsmonsoon and utility fluctuation defensecombined with panel upgrades when applicable | Pima County homeowners with electronics, appliances, or a home battery system to protect | Arizona's monsoon season brings lightning and utility fluctuations that can damage wiring and equipment in a single event. A suppressor at the panel is one of the more practical installations we do in this area. |
| Lighting Installation | recessed LED and fixture replacementunder-cabinet lightingsecurity and motion sensor lightsoutdoor landscape and patio lighting | homeowners remodeling, adding outdoor lighting, or upgrading to LED | Outdoor lighting in Tanque Verde takes real sun and heat exposure. Weatherproof fixtures and correct circuit protection make a difference in how long the installation holds up. |
| Outdoor & Misting-System Circuits | dedicated outdoor circuitsweatherproof outlet installationcovered patio and pergola wiringmisting system power supply | homeowners adding outdoor living space or a misting system in the Tanque Verde heat | Outdoor circuits in this climate need weatherproof boxes, correct conduit, and GFCI protection. We spec the installation to handle the sun and heat exposure here. |
| Ceiling Fan Installation | new fan installation with wiringfan and light kit replacementswitch and remote wiringbrace box installation for older boxes | homeowners adding comfort and airflow in bedrooms, living areas, or covered patios | Older ceiling boxes are often not rated for a fan's weight and movement. We check the box and replace it if needed before the fan goes up. |
| Electrical Repairs & Troubleshooting | dead outlets and switchesflickering or dimming lightstripping breakerswiring faults and diagnostics | homeowners and renters dealing with an active electrical problem | A full diagnostic runs before any repair so the fix addresses the actual cause, not just the symptom. |
| RV Hookups | 30-amp and 50-amp RV outlet installationdedicated circuit from the main panelweatherproof outlet and conduitpermit coordination where required | homeowners who store an RV or trailer on their property and want a proper hookup | A dedicated circuit sized to the RV's draw is safer and more reliable than an extension cord setup. We confirm panel capacity before adding the circuit. |
| Breaker & Fuse Repair | breaker replacementbreaker that trips immediately on resetfuse panel evaluationpanel labeling and documentation | homes where a single breaker or fuse is the problem rather than the whole panel | A breaker that trips immediately on reset or runs warm is a sign of a fault on the circuit, not just a worn breaker. We diagnose the circuit before replacing hardware. |
| Wiring & Circuit Installation | new circuit runswhole-home rewiringknob-and-tube and aluminum wiring remediationcode compliance and permit coordination | older homes with outdated wiring, additions, and new construction | Homes in the Tanque Verde area built before the 1980s may carry wiring installed under standards that have since been updated. We assess what is there and explain the options before any work begins. |
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgradesload calculation before any upgradeservice entrance and meter base workbreaker panel replacement | homes with frequent tripping, limited breaker space, or added load from AC, EV chargers, or solar | Arizona summers put continuous load on air-conditioning systems. Homes built with 100-amp service were not designed for that combined demand. A load calculation confirms whether an upgrade is the right solution before any work is scheduled. |
| EV Charger Installation | Level 2 charger circuit installation240-volt dedicated circuitpanel capacity check before installpermit coordination | EV owners who want faster daily charging at home | We check panel capacity before every EV charger installation. If an upgrade is needed, we scope it as part of the same project so you are not scheduling two separate visits. |
| Outlet & Switch Installation | standard and GFCI outletsAFCI and tamper-resistant receptaclesUSB and weatherproof outdoor outletsdimmer and three-way switches | homeowners updating a kitchen, bathroom, garage, or outdoor space | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. We flag unprotected locations and can bring them up to current code while already on the job. |
| Solar & Battery Installation | solar interconnection wiringbattery storage circuit workinverter and panel capacity workpermit coordination for solar projects | homeowners adding rooftop solar or a home battery system | We handle the electrical side only: the wiring, dedicated circuits, and panel capacity work that connect the system to your home's power supply. We do not sell or mount solar equipment. |
| Electrical Safety Inspections | panel and wiring condition reviewgrounding and bonding checkoutlet and protection device assessmentwritten report of findings | homebuyers, sellers, landlords, and property managers | Inspections give you a clear picture of what a property needs before a sale closes or a tenant moves in. We issue a written report of what we find. |
Call (520) 336-9828 to talk through any of the services listed here and get a quote before anything is scheduled.
(520) 336-9828